Operational Limits
MODELLI
803BB-0160
803BB-0280
803BB-0240
803BB-0260
Max. net clearance width (m)
5
5
5
5
Technical Characteristics
MODELLI
803BB-0160
803BB-0280
803BB-0240
803BB-0260
Protection rating (IP)
54
54
54
54
Power supply (V-50/60 Hz)
230 AC
230 AC
230 AC
230 AC
Power supply to motor (V)
24 DC
24 DC
24 DC
24 DC
Power (W)
240
240
240
240
Opening time at 90° (s)
2 /6
2 /6
2 /6
2 /6
Cycles/Hour
350
350
350
350
Operating
temperature (°C)
-20 / +55 (-40) with item 001PSRT01
-20 / +55 (-40) with item 001PSRT01
-20 / +55 (-40) with item 001PSRT01
-20 / +55 (-40) with item 001PSRT01
RAL color
7024
7024
GGT40AGS - Automatic barrier with irreversible 24 V DC operator with encoder; galvanized steel and painted cabinet with set up for fitting accessories.
Balancing spring included.
GGT40ACS - Automatic barrier with irreversible 24 V DC operator with
encoder; galvanized steel cabinet with customized RAL painting and set up for fitting accessories.
Balancing spring included.
GGT40AX4 - Automatic barrier with irreversible 24 V DC operator with
encoder; AISI 304 satin-finish steel cabinet with set up for fitting accessories.
Balancing spring included.
White painted aluminum boom, 90 x 60 mm, with internal reinforcement, groove cover-strip and shock-proof rubber profile. Length: 4220 mm.
White painted aluminum modular boom, complete with cap, consisting of: no. 2 booms 90 x 60 L = 2600 mm, joint, internal reinforcement, hollow cover profiles and shockproof rubber profile.
Detachable boom attachment. After impact, the end of the detached boom rests onto the ground.
Full height skirt in painted aluminum. 1720 mm module, H =1300 mm, complete with junction brackets.
Control card kit for operating during power outages and for recharging batteries, with battery housing.
Point A, B and C are the springs' fastening points, depending on the clearance width.
The spring attachment points A, B and C refer to the table above.
LATERAL CLEARANCE WIDTH (m) | |||||
BOOM COMPOSITION | 2,25 < 2,75 | 2,75 < 3,25 | 3,25 < 3,50 | 3,50 < 3,75 | 3,75 < 4,00 |
Boom with LED strip | |||||
Boom with LED strip and single skirt | |||||
Boom with LED strip and full-height skirt | |||||
Boom with LED strip and swing rest | - | - | |||
Boom with LED strip, single skirt and swing rest |
- | ||||
Boom with LED strip, full- height skirt and swing rest |
- | - |
CAME's R&D department has developed a practical variable balancing system, which allows using a single spring that can be connected to the balancing lever at different predefined points. It is therefore no longer necessary to have specific springs for the different boom lengths, but it is sufficient to operate on the hooking system.
The control board is positioned directly under the cabinet cover. All the configuration and maintenance phases can therefore be carried out comfortably standing upright, with the cabinet closed, in complete safety.
Suitable for both residential and industrial use, the folding skirt is the ideal solution to prevent access by pedestrians or unauthorized vehicles. GARD GT4 can be equipped not only with a lower skirt, but also with a special full-height solution that can be fully folded to close the gate to a height of 130 cm. This accessory is made of aluminum with white/red painted strips.